Home > Datasheets > Siroflex
An incredible instant grab adhesive based on MS polymer technology. It has initial bond strength double that of most other grab adhesives, therefore eliminating the need for secondary support on the majority of applications. Can be used internally or externally, even on damp or wet surfaces. SX Mighty Strength Grip & Grab Adhesive is solvent free, cures quickly and is water and weather proof.
Suitable for bonding most building substrates but in particular for fixing of large panels and wallboards. Ideal for bonding brick slips, claddings and sanitary fixtures. Can also be used to fix dado rails, windowsills, decorative mouldings and thresholds to virtually any surface. Will fix and adhere to glass, wood, enamel, painted surfaces, plaster board, coated metals, Perspex, concrete, plastics, polycarbonates, PVCu, zinc, stainless steel, copper, lead, anodised aluminium, epoxy and polyester panels. An excellent alternative fixing adhesive that replaces nails screws and other mechanical fixings.
Surfaces must be clean and dust free.
Cut the cartridge seal and screw on the pre cut ‘V’ notched nozzle which must be used to ensure the correct depth of adhesive is extruded. The product by its nature is stiff to gun, so always use a good quality applicator gun such as SX Trade Revolving Caulking Gun. Apply the adhesive on one surface only in vertical strips 30cm apart. Immediately place item into position with good, even pressure to give an excellent initial grab. On extremely heavy items temporary support may be necessary during the curing process. Mechanical fixings should always be used in overhead applications.
Contains N-(3-(trimethoxysilyl)propyl)ethylenediamine, N-[3-(dimethoxymethylsilyl)propyl] ethylenediamine. May produce an allergic reaction. Safety data sheet available to professional user on request. Dispose of empty packaging correctly.
Among others, not recommended for applications on PE, PP, Teflon and bituminous surfaces. Not recommended for continuous underwater applications or expansion joints. Yellowing may occur in the dark. Not paintable with alkyd resin paints. Porous surfaces may require a primer. Adhesion tests prior to application are recommended. It is the users responsibility to determine suitability. Store between +5ºC and +25ºC in cool, dry conditions.
The information given is the result of our tests and experience and is believed to be accurate and reliable. However, as Siroflex Limited cannot know all the uses its products may be put to, and as application methods are out of our control it is the users responsibility to determine suitability of use.
TECHNICAL DATA | DIMENSION | SX MIGHTY STRENGTH GRIP & GRAB ADHESIVE |
Basis | MS Polymer | |
Application Temperature | ºC | +5/ +40 |
Application rate 3mm/ 6,3 bar | g/min | 10 |
Flow ISO 7390 | mm | <2 |
Density | g/ml | 1,57 |
Skin over time 23ºC/ 55% RF | min | 10 – 15 |
Curing after 24 hours 23ºC/ 55% RF | mm | 2 – 3 |
Basis | Yes | |
Frost resistant till –15ºC during transport | Yes | |
Shelf life between+5ºC and +25ºC | month | 9 |
Joint movement capability | % | ±25 |
Temperature resistance after curing | ºC | -40/ +100 |
Mechanical properties 2mm film | ||
Shore-A hardness (3s) DIN 53505 | 60 | |
100% Modulus DIN 53504 | MPa (N/mm²) | 1,4 |
Tensile strength DIN 53504 | MPa (N/mm²) | 2,2 |
Elongation at break DIN 53504 | % | 350 |